BIBO Pulmifier® Launch Edition | Mobile Equine Inhaler

ORDER NOW - SHIPPING FROM 29.10.2026

The Set in Detail

Product Data
  • Vibrating Mesh Nebuliser powered by Aerogen® technology
  • Up to 2,000 applications* with one nebuliser
  • Median droplet size (Dv50): 3.456 μm
  • 73.3 % of droplets 5 μm or smaller
  • Nebulisation rate 0.8-1.2 ml/min
  • Filling volume up to 50 ml
  • Controller protection class: IP44 (protection against solid foreign bodies ≥ 1 mm and against splashing water from all directions)
  • Rechargeable battery with 3,500 mAh
  • Battery life approx. 5 hours
  • Controller with bumper for impact protection
  • Nearly silent nebulisation

* Up to 2,000 uses with daily inhalation. Industry standard reference value: One application corresponds to 10ml 0.9% NaCl

What’s Included in the Set
  • PE PureFit Mask
  • 2-in-1 BioThane® Strap
  • BIBO Pulmifier® Nebuliser
  • BIBO Pulmifier® Controller
  • BIBO Pulmifier® Power Supply
  • BIBO Pulmifier® Charging Cable
  • BIBO Pulmifier® Carry Bag
  • B. Braun 0.9% saline solution 500 ml
  • bitopEQUI® Lung Complete 500 ml
  • Höfer Chemie® Isopropanol 70% 250 ml
  • B. Braun Spike
  • B. Braun Omnifix® 50 ml Syringe
  • Waldhausen Gel Poll Guard
How the BIBO Pulmifier® works

The BIBO Pulmifier® was deliberately developed to be uncomplicated. Plug & Play – Connect the two parts, fill the nebuliser and start the device. No preparation, no intermediate steps. The form-fitting aerosol chamber, which is integrated into the mask, ensures targeted aerosol delivery directly into the nostrils, while the soft, elastic seal supports a comfortable fit.

Cleaning

Cleaning the nebuliser

After each use, about 1 ml of B. Braun 0.9% saline solution 500 ml is briefly nebulised to loosen residues. The nebuliser is then carefully swirled out with around five sprays of Höfer Chemie® Isopropanol 70% 250 ml. If desired, it can also be rinsed with a little B. Braun Distilled Water 500 ml. Isopropanol and distilled water are not nebulised. Finally, the nebuliser is left open to dry in the air.

Cleaning the PE PureFit Mask

After each use: The controller and nebuliser are removed from the mask. Next, first the 2-in-1 BioThane® Straps and then the neoprene sleeve are removed. The mask is wiped with a cleaning or disinfectant wipe. The mask's antibacterial material helps in everyday use, but is no substitute for regular cleaning.

For heavier soiling: The mask can also be rinsed out. To let any remaining liquid drain properly, the drain plug is removed and only reinserted once the mask is completely dry.

Neoprene sleeve: If needed, the sleeve is wiped with a cleaning wipe or washed in the washing machine at 30 to 40 °C with a mild detergent. It must not go in the tumble dryer and must not be bleached. No disinfectant is used on the sleeve, as it can cause the material to break down.

2-in-1 BioThane® Straps: If needed, the straps are wiped with a cleaning wipe.

Reassembly: Once all parts are clean and dry, first the neoprene sleeve and then the straps are refitted. The mask is then ready for the next use.

Storage

To keep the BIBO Pulmifier® reliable for a long time, all components should be stored completely dry, as residual moisture can encourage mould. In winter, the device is best stored at room temperature to protect the battery. At sub-zero temperatures, residual liquid in the mask and nebuliser can freeze.

Inhalation solutions should not be stored too cold either, as they become thicker at low temperatures. If the equine inhaler is only used occasionally, it is advisable to charge the battery for about 30 minutes from time to time so that it does not deep-discharge.

The BIBO Pulmifier® is operated at 5 to 45 °C and up to 95% humidity. For storage and transport, −20 to +60 °C at 15 to 95% humidity are permitted.

Advantages over other equine inhalers

  • Nebuliser for up to 2,000 applications* powered by Aerogen®
  • Controller protection class: IP44 (protection against solid foreign bodies ≥ 1 mm and against splashing water from all directions)
  • Controller with bumper for impact protection
  • Cordura® SoftFit Mask with integrated panic release
  • PE PureFit Mask with antibacterial additive**
  • Plug & Play – Connect the two parts, fill the nebuliser and start the device

* Up to 2,000 applications with daily inhalation. Industry standard reference: One application equals 10ml of 0.9% NaCl

** 99.99% bacterial reduction after 24 h. Tested with Escherichia coli ATCC 8739 and Staphylococcus aureus ATCC 6538P according to JIS Z 2801:2010. Antibacterial silver additive in the PE material. According to SGS Thailand (ISO/IEC 17025 accreditation), test report dated 13.07.2026.

Downloads
About the manufacturer

Contact information pursuant to Art. 19 of the EU General Product Safety Regulation (GPSR)

Postal address

WLA Health & Care AG
Löwenstrasse 16
8280 Kreuzlingen
Switzerland

Electronic address

Email: info@wla-health.com
Web: https://wla-health.com/

Included in the set

  • PE PureFit Maske Icon

    Mask

  • Haltegurt Icon

    Mask strap

  • Transporttasche Icon

    Carry bag

  • BIBO Pulmifier® Controller Icon

    Controller

  • BIBO Pulmifier® Vernebler Icon

    Nebuliser

  • BIBO Pulmifier® Netzteil Icon

    Power supply

  • BIBO Pulmifier® Ladekabel Icon

    Charging cable

  • NaCl Icon

    Saline solution

  • bitopEQUI® Lung Complete Icon

    EQUI Lung Complete

  • Höfer Chemie Isopropanol 70 % 250 ml Icon

    Isopropanol

  • B. Braun Spike Icon

    Mini Spike

  • B. Braun Omnifix® Spritze 50 ml Icon

    Dosing syringe 50 ml

  • Nackengurt Icon

    Poll protector

Load video:

The BIBO Pulmifier® Launch Edition

Anyone dealing with equine inhalation for the first time quickly notices how complicated many devices seem. Hoses, cables, loud technology, or complex setups often cause uncertainty even before the first use.

The BIBO Pulmifier® Launch Edition deliberately takes a different approach. The inhalation set combines easy handling with state-of-the-art nebulisation technology and the quietest possible application in daily stable life.

The BIBO Pulmifier® was developed together with horse owners and veterinarians from the Gross-Wallstadt Equine Clinic (Germany). Many details emerged directly from experiences in daily interaction with horses undergoing inhalation. Because in the stable, often not only the pure nebulisation performance matters, but also how uncomplicated and reliable an equine inhaler can be integrated into everyday life.

That's why its use is deliberately kept simple. Plug & Play. Connect the two parts, fill the nebuliser and start the device. No preparation, no intermediate steps. Especially for horse owners with no previous experience with an inhaler, and for young or restless horses, the simple and quiet application helps in everyday life.

Nebuliser & Controller

The nebuliser works with modern Vibrating-Mesh powered by Aerogen® technology. Aerogen® is considered a world leader in aerosol drug delivery in acute human medical care.

This forms the basis of the BIBO Pulmifier®.

At the same time, the nebuliser was deliberately designed for regular use in the stable. With a lifespan of up to 2,000 applications, the BIBO Pulmifier® reliably supports long-term inhalation routines.

In the stable, an inhaler for horses must not only nebulize well, but also be practical. That's why the controller is IP44 protected – against solid foreign bodies larger than 1 mm and against splashing water from all directions. The controller is also equipped with a bumper to protect against impacts.

Thanks to battery operation, inhalation remains flexible in daily stable life. The horse inhaler can be used on the move and easily taken between the stall, stable aisle or trailer.

Load video:

Clear signals with every inhalation

When switched on, the BIBO Pulmifier® performs a short self-test, which is accompanied by an acoustic signal. If the green power indicator is lit, the device is ready for use. During nebulisation, a green illuminated ring indicates that the inhalation is in progress. If the ring flashes, the application is paused.

Once the inhalation solution has been completely nebulised, the device recognises this automatically. Three short acoustic signals indicate that the application is complete, and the horse inhaler automatically switches to standby mode.

The battery level is also visible at all times. Four LEDs indicate the charge in 25% increments. If the last LED glows orange, the battery has enough power for approximately one 10 ml inhalation. A yellow warning triangle indicates that the connection between the nebuliser and the controller should be checked.

If the device is not in use, it switches off automatically: after 3 minutes in standby mode, and after 10 minutes when paused.

Mask & Strap

The anatomically shaped PE PureFit Mask contains an antibacterial additive* that reduces bacteria by 99.99% after 24 hours, which also keeps the regular care of the mask straightforward. The soft neoprene sleeve provides maximum flexibility and pleasant wearing comfort. Particularly practical in everyday stable life is the included BioThane® strap with 2-in-1 function: it can be used either as a classic neck strap or directly as a halter strap. This allows the mask to be attached in different ways depending on the horse and your usual handling. The PE PureFit Mask is available in the colours Sand, Dark Oak and Lagoon.

* 99.99% bacterial reduction after 24 h. Tested with Escherichia coli ATCC 8739 and Staphylococcus aureus ATCC 6538P according to JIS Z 2801:2010. Antibacterial silver additive in the PE material. According to SGS Thailand (ISO/IEC 17025 accreditation), test report dated 13.07.2026.

The PE PureFit mask in detail

Anatomically shaped. Easy-care. For daily use in the stable.

A comparison of BIBO Pulmifier® editions

Scope of delivery Saddle Up Edition Launch Edition
Cordura® SoftFit Mask or PE PureFit Mask Included Included
BIBO Pulmifier® Nebulizer Included Included
BIBO Pulmifier® Controller Included Included
BIBO Pulmifier® Power Supply Included Included
BIBO Pulmifier® Charging Cable Included Included
BIBO Pulmifier® Carrying Case Not included Included
Waldhausen Gel Poll Guard Not included Included
B. Braun Sodium Chloride 0.9% 500 ml Not included Included
bitopEQUI® Lung Complete 500 ml Not included Included
B. Braun Spike Not included Included
B. Braun Omnifix® Dosing Syringe 50 ml Not included Included
View editions View Saddle Up Edition View Launch Edition

Questions & Answers

Who is the BIBO Pulmifier® Launch Edition suitable for?

Our all-round carefree package: The Launch Edition is especially aimed at horse owners who have not yet used an inhaler for horses and are looking for the easiest possible introduction to inhalation.

Is the BIBO Pulmifier® also suitable for sensitive horses?

The BIBO Pulmifier® works almost silently. Especially with noise-sensitive or nervous horses, this can ensure more calm during inhalation. The masks are also designed for a comfortable fit: Soft seals close around the horse's nose without the mask feeling unnecessarily hard. This minimizes additional stimuli during inhalation.

How easy is it to set up the BIBO Pulmifier®?

The BIBO Pulmifier® consists of just a few components and can be prepared in a few simple steps. Plug & Play - Connect the two parts, fill the nebuliser and start the device.

Can the inhaler also be used on the go?

Yes, the BIBO Pulmifier® is completely wireless. This means it is battery-operated and works without an external power source or additional connection cables. This allows the mobile equine inhaler to be used flexibly between the stable box, aisle, or trailer.

What's special about the BIBO Pulmifier® nebuliser?

The nebuliser uses Vibrating-Mesh powered by Aerogen® technology. Aerogen® is considered the world market leader in aerosol medication delivery in acute human medicine.

In addition, the nebuliser is designed for up to 2,000 applications, preparing it for long-term use in the stable.

Which mask is the right one?

Both masks are suitable for regular inhalation with the BIBO Pulmifier® – the choice primarily depends on what is important in daily stable life.

The Cordura® SoftFit Mask is lightweight, flexible, and robust. The soft natural rubber seal ensures a secure, flexible fit and high wearing comfort, while the integrated panic release provides additional safety. Furthermore, the mask can be easily wiped clean after use.

The PE PureFit Mask is anatomically shaped and features an antibacterial additive*. The neoprene sleeve seals around the horse's nose, ensuring a secure, flexible fit and high wearing comfort. The included BioThane® strap can be used as a neck or halter strap as needed. Additionally, the mask is available in Sand, Dark Oak, and Lagoon.

* 99.99% bacterial reduction after 24 h. Tested with Escherichia coli ATCC 8739 and Staphylococcus aureus ATCC 6538P according to JIS Z 2801:2010. Antibacterial silver additive in the PE material. According to SGS Thailand (ISO/IEC 17025 accreditation), test report dated 13.07.2026.



Didn't find an answer?

Do not hesitate to contact us